 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
The Model 260 Digital Syringe Dispenser consists of a controller, dispense syringes and accessories. It is used to automatically or manually apply low to high viscosity materials in shot sizes from microliters to milliliters. It incorporates a digital timer with a range of 0.01 to 99.99 seconds control volume, adjustable pressure to control flow rate and an independently adjustable vacuum pullback system to prevent dripping or drooling. The unit is easily interfaced with jigs, fixtures, and automated equipment.
This unit has a teach mode for volume dispensed. Not unique, but not found on any other units in its price range.
Handles beads, dots and fills.
Air regulator with gauge on front panel for adjusting the pressure applied to the syringe.
Operation:
In the automatic mode, when the operator actuates the foot switch, regulated air is supplied to the syringe for a precise preset time. At the end of the timed pulse an independently regulated vacuum is automatically applied to stop the dispense and prevent dripping. When in the manual mode, operation is the same except that the duration of the air pulse is controlled by the length of time the operator actuates the foot switch. 5, 10, and 30 cc disposable syringes are standard, however, other capacities are available.
The system includes:
One Tridak Model 260 controller
One syringe stand
One foot switch
Air hose and fittings
Aircap of choice: 3, 5, 10 and 30 cc
Miscellaneous syringe barrels and tips
Specifications:
Power Required • 110 VAC, 50/60 Hz, 1/10 amp (auto-ranging to 240VAC)
Air Required • 70-100 psi
Controller Dimensions • 9" W x 2.5" H x 6" D
Controller Weight • 3.6 lbs
