The 175 is a Pneumatic/Electric syringe dispense system with vacuum pullback.

Select for more details: . . . . . .

The 250 is an electronically timed syringe dispense system with vacuum pullback. A second option adds ultra precision regulation. A vacuum pencil is also offered.

Select for more details: . . . . . .

The 340 system includes suck-back and a simple, completely disposable wetted system. It can be optimized for difficult to handle materials with high viscosity and that are very stringy.

Select for more details: . . . . . .

The The 350 system is designed for high viscosity materials and a second option provides for high pressure up to 120 PSI.

Select for more details: . . . . . .

The 375 is suitable for small shots of high viscosity material such as solder paste.

Select for more details: . . . . . .

The 455 range is a precision metering system for low and medium viscosity materials. Options are ultra precision regulation, all pneumatic hand held manual control and hand held with a controller.

Select for more details: . . . . . .

The 525 provides for heating during the dispense process and is used for heated applications up to 400°F (205°C) which require large reservoirs made form stainless steel, or a heated valve that can be located remote from the reservoir.

Select for more details: . . . . . .

The 575 is a heated dispense system for applications where heat is required up to 300°F (149°C) and a 20 oz. capacity aluminum reservoir is adequate.

Select for more details: . . . . . .

The 775 offers a system with suck back, metal selection and heating.

Select for more details: . . . . . .